How to Create a Gallery Wall with Gaming Art Prints

Quick answer

Plan your gaming art prints gallery wall on the floor first, using paper templates to lock in spacing before you make any holes. Keep 2 to 3 inches between frames, align the center of the arrangement at eye level, and choose one anchor piece to guide scale. Then hang from the center outward and light the wall from above so the art stays the focus.

A gallery wall can make a small room feel curated and a large room feel personal, but it falls apart fast when you skip the planning stage. Gaming art prints come in different sizes and orientations, so the arrangement matters as much as the art itself.

This guide walks through the full process, from choosing a wall and gathering your prints to hanging them without a trail of rejected nail holes. It also covers the mistakes that make a video game art display look cluttered instead of collected.

Choose the wall and set your anchor piece

Start by picking a wall with enough clear space and reasonable light. A wall behind a sofa, above a desk, or along a hallway works well because it already has a natural viewing distance. Avoid walls in direct, harsh sunlight unless you plan to frame with UV-filtering glazing, since fading is the most common long-term damage to prints.

Next, choose one anchor print, usually the largest or the one with the strongest color. This piece sets the scale for everything else. If your anchor is small, a wall of small prints can look sparse on a large wall; if it is large, mixing in a few smaller pieces keeps the arrangement from feeling heavy.

• Measure your wall width and height before buying frames so you know your usable area.
• A good rule of thumb is to keep the arrangement between 60 and 75 percent of the furniture width below it.

Gather prints and decide on frames

Lay out every print you are considering. A mix of sizes and orientations usually reads better than identical frames in a perfect grid, but a consistent frame color or finish ties mismatched art together. Black, white, and natural wood are the easiest finishes to repeat across a collection.

If you are starting a collection, bundles can be a practical way to get several coordinated pieces at once. The Life is Strange: True Colors - Alex Chen Collector's Set includes a collector's pin and a collector's plush rather than prints, so it works better as a shelf companion to a gallery wall than as wall art itself. For actual wall pieces, check the Art Print and Poster categories and confirm the dimensions before framing.

• Matting adds visual breathing room and makes small prints read larger.
• Keep frame profiles similar in depth so the wall does not look uneven from the side.

Lay out the arrangement on the floor

Clear a floor space the same size as your wall area and arrange the prints there. This lets you test gallery wall ideas without damaging the wall. Work from the anchor outward, balancing visual weight rather than matching shapes exactly.

A common approach is to keep the center of the whole arrangement at roughly eye level, about 57 to 60 inches from the floor. If the wall sits above furniture, aim for 6 to 10 inches between the bottom of the lowest frame and the furniture top.

• Photograph the finished floor layout so you can recreate it exactly on the wall.
• Step back several feet and check the arrangement from the room's main viewing angle.

Mark the wall with paper templates

Trace each frame onto kraft paper, cut out the shapes, and tape them to the wall in your planned arrangement. This is the step most people skip, and it is the one that prevents a wall full of unnecessary holes. Adjust spacing until the layout feels balanced.

Keep 2 to 3 inches between frames for a tight, gallery-style look, or 4 to 6 inches for a more airy arrangement. Consistency matters more than the exact number, so pick a spacing and repeat it throughout.

• Mark the hanging point on each paper template, not just the frame outline.
• Use painter's tape so the templates come off cleanly without lifting paint.

Hang from the center outward

Start with the anchor piece and measure twice before drilling. Once the center is level and correct, work outward in pairs so the arrangement stays symmetrical. A small spirit level is worth keeping on hand, because frames that look level by eye are often slightly off.

Use hardware rated for the frame weight. Light prints can hang on small nails or adhesive strips, but heavier framed pieces need wall anchors or a stud. If you rent, adhesive hooks work for lightweight frames but may not hold larger ones safely.

• Check level after each frame, not just at the end.
• Leave the paper templates up until the frame is actually hung and level.

Light the wall and finish the display

Lighting changes how a gallery wall reads. An adjustable picture light or a nearby floor lamp aimed at the wall reduces glare and makes colors pop. Avoid placing a light directly in front of the art, which creates hot spots and reflections on glossy frames.

Once the prints are up, add small personal objects nearby to tie the display into the room. Pins, keychains, or a plush on a shelf below can extend the theme without crowding the wall itself. The Danganronpa 1.2 Reload - Magical Miracle Girl Usami Wand Pin and the Dragon Age - The Iron Bull's Collector's Pin are both about 1.6 inches tall, so they work well on a small ledge or pin board beside the prints.

• Rotate or swap one or two prints seasonally to keep the wall feeling fresh.
• Dust frames with a dry microfiber cloth rather than spraying cleaner directly on the art.

Gallery wall steps at a glance

1. 1. Pick the wall and anchor piece: Choose a wall with good viewing distance and one anchor print that sets the scale. Measure the usable area first. Checkpoint: the anchor should be the largest or boldest piece in the arrangement.
2. 2. Gather and frame your prints: Mix sizes and orientations, but repeat frame color and profile so the wall feels intentional. Checkpoint: confirm dimensions before buying frames.
3. 3. Lay out on the floor: Arrange the prints on the floor at the same size as the wall area and photograph the layout. Checkpoint: the center of the arrangement should sit near eye level.
4. 4. Tape paper templates to the wall: Cut templates for each frame, tape them up, and adjust spacing until balanced. Mark hanging points on the paper. Checkpoint: keep spacing consistent, usually 2 to 3 inches for a tight look.
5. 5. Hang from the center outward: Install the anchor first, then work outward in pairs. Use hardware rated for the frame weight and check level as you go. Checkpoint: leave templates up until each frame is level.
6. 6. Light and finish the display: Add adjustable lighting from above and place small collectibles nearby to tie the wall into the room. Next step: rotate one or two prints every few months to keep the wall fresh.

Products that pair well with a gallery wall

• Life is Strange: True Colors - Alex Chen Collector's Set: Includes the Alex Chen Collector's Pin and the Alex Chen Collector's Plush, officially licensed by DONTNOD Entertainment and Square Enix. A coordinated set gives you shelf or ledge pieces that match the theme of a gallery wall without adding more frames.
• Danganronpa 1.2 Reload - Magical Miracle Girl Usami Wand Pin: Hard enamel pin with a nickel finish, approximately 1.6 inches tall and 1.06 inches wide. Its small size makes it easy to display on a pin board or narrow shelf below your prints.
• Dragon Age - The Iron Bull's Collector's Pin: Official Dragon Age collector's pin, approximately the same compact scale as other collector pins. A second small piece lets you build a themed cluster without competing with the art prints for attention.

A gaming art prints gallery wall works best when you plan it like a small project: anchor first, floor layout second, paper templates third, and hanging last. Take your time with spacing and lighting, and the wall will look deliberate rather than improvised.